NTP001 NTP Server

Ethernet

LAN

1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Network

Network protocols

TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SSL/TLS, ARP, SSH, DHCP, SNMP, MQTT

Connection monitoring

Ping Reboot, Wget Reboot, Periodic Reboot

Network topology

Visual representation of your network, showing which devices are connected to which other devices

DDNS

Supported >25 service providers, others can be configured manually

Security

Authentication

Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator

WEB filter

Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

Access control

Flexible access control of SSH, Web interface, CLI and Telnet

802.1x

Port-based network access control client

NTP

Supported modes

Server - Receive time from GPS and act as a NTP server to broadcast time for other devices (Stratum 1). Broadcast time through UDP or over Serial (RS232, RS485)

Daytime Protocol

TCP/UDP

Date over Serial

RS232/RS485

NTP

NTPv4, NTP authentication (MD5/SHA1), Unicast/Multicast/Broadcast mode

Protocol

NTP Stratum 1 Time Server (NTPv4) 

NTP Accuracy

Ethernet NTP ±1ms overall

NTP Performance

>300 NTP requests per second (wire speed)

Synchronization Accuracy

LAN synchronization typically 1–10ms

MODBUS

Supported modes

Server, Client

Supported connection types

RTU (RS232, RS485), TCP

Custom registers

MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality

Supported data formats

8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

MQTT Gateway

Modbus MQTT Gateway

Allows sending commands and receiving data from MODBUS Server through MQTT broker

API

Teltonika Networks Web API (beta) support

Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com

Monitoring & Management

WEB UI

HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status

SSH

SSH (v1, v2)

SNMP

SNMP (v1, v2, v3), SNMP Trap, Brute force protection

JSON-RPC

Management API over HTTP/HTTPS

MODBUS

MODBUS TCP status/control

System Characteristics

CPU

Mediatek, 580 MHz, MIPS 24KEc

RAM

128 MB, DDR2

FLASH storage

16 MB, NOR Flash

Firmware / Configuration

WEB UI

Update FW from file, check FW on server, configuration profiles, configuration backup

Keep settings

Update FW without losing current configuration

Factory settings reset

A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration

FIRMWARE CUSTOMISATION

Operating system

RutOS (OpenWrt based Linux OS)

Supported languages

Busybox shell (ash), Lua 5.1, C, C++

Development tools

SDK package with build environment provided

GPL customization

You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs

TIME SYNCHRONIZATION

Acquisition Sensitivity

Acquisition Sensitivity -146 dBm, Reacquisition Sensitivity -157 dBm, Tracking Sensitivity -157 dBm

Time Source

GPS 1575.42 ±1.023 MHz, GLONASS 1597.5–1605.8 MHz, Galileo 1575.42 ±2.046 MHz, BDS 1561.098 ±2.046 MHz

Startup

Cold GPS acquisition in <120 seconds

Serial

RS232

Terminal block connector: TX, RX, RTS, CTS

RS485

Terminal block connector: D+, D-, R+, R- (2 or 4 wire interface)

Input / Output

Input

3 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high

Output

3 x Digital Output, Open collector output, max output 30 V, 300 mA

Power

Connector

2-pin in 16-pin industrial terminal block

Input voltage range

9 - 30 VDC, Overvoltage protection, Reverse polarity protection, Surge protection +/- 1kV 50 uS Max

Power consumption

Idle: < 2 W, Max: < 3.5 W

Physical Interfaces

Ethernet

1 x RJ45 ports, 10/100 Mbps

I/O’s

3 x Configurable I/O, 1 x Analog input in 16-pin terminal block

Status LEDs

1 x Power, 2x GNSS status LEDs, 1x NTP Server status LED, 3 x IO status LEDs

Power

1 x 16-pin terminal block

Antennas

1 x SMA for GNSS

RS232

4-pin in 16-pin terminal block (TX, RX, RTS, CTS)

RS485

4-pin in 16-pin terminal block (D+, D-, R+, R-)

Reset

Reboot/User default reset/Factory reset button

Physical Specification

Casing material

Anodized aluminum housing and panels

Dimensions (W x H x D)

82.6 x 25 x 83 mm

Weight

180 g

Mounting options

DIN rail, wall mount, flat surface (all require additional kit)

Operating Environment

Operating temperature

-40 °C to 75 °C

Operating humidity

10% to 90% non-condensing

Ingress Protection Rating

IP30

Regulatory & Type Approvals

Regulatory

CE, UKCA, CB, UCRF, EAC, WEEE