Norwegian 
English 
ATO-A1 Mini OTDR
ATO-A1 Mini OTDR
The ATO-A1 OTDR series is used in the installation and maintenance of fiber optic cables. It offers a multitude of benefits, including highly accurate testing capabilities, quick response times, and user-friendly operation. The ATO-A1 Series is specifically designed to provide precise and rapid results while automating the report generation process. This streamlines fiber optic network maintenance, troubleshooting, and optimization, ensuring efficient and reliable performance.
BuyFeatures
-
4.3-inch HD touch screen
-
Measures distances as short as 2 meters
-
Covers full range of user interface including USB A, Micro-USB and SD card
-
Ultra-high battery capacity and portable power bank
Do you need help?
| General specification | |
| Display | 4.3 inch HD (touch screen) |
| Battery | 3.7 V/5200mAh X 1 lithium battery Continuously test: > 8 hours (backlight off) |
| Charging time: 3 hours with adapter; 10 hours with USB | |
| Data Storage | 100,000 groups of curves |
| Interface | USB A Type×1, Micro-USB×1, 16GB SanDisk |
| Working Temp | -10℃~+50℃ |
| Storage Temp | -20℃~+70℃ |
| Humidity | ≤95% (non-condensation) |
| Accessories | Main unit, 12V power adapter, Lithium battery, FC adapter, USB cord, User guide, carrying case, wrist belt |
| Dimension | 7.1× 4.3×1.8 inches/ 1.54 pounds (battery included) 180×110×46 mm/ 0.7kg (battery included) |
| Test parameter | ||
| Single Mode | Multi-Mode | |
| Wavelength | 1310nm, 1550nm (Standard） 1625nm、1650nm (Optional with MOQ) |
850nm, 1300nm (Optional with MOQ) |
| Dynamic range | ATO-A1-S20 ATO-A1-S22 ATO-A1-D22 ATO-A1-D24 ATO-A1-D26 |
20 dB @1550nm 22 dB @1550nm 22/20 dB @1310/1550nm 24/22 dB @1310/1550nm 26/24 dB @1310/1550nm |
| Testing Distance | 70km, 80km, 90km | |
| Sampling Resolution | Minimum 10cm | |
| Sampling Point | Maximum 64,000 points | |
| Linearity | ≤0.05dB/dB | |
| Scale Indication | X axis: 4-70m/div, Y axis: 0.09-5dB/div | |
| Loss Threshold | 0.01dB | |
| Loss Resolution | 0.001dB | |
| Distance Resolution | 0.01m | |
| Distance Accuracy | ±(1m+measuring distance×3×10^-5+sampling resolution) | |
| Refraction Setting | 1.2000~1.5999, 0.0001 step | |
| Dynamic Range | 20~26dB (22dB/24dB) | |
| Dead Event Zone | 1.2m/5.5m (2m/8m) | |
Dynamic range is measured with maximum pulse width, averaging time is 3 minutes, SNR=1; The level difference between the RMS noise level and the level where near end back-scattering occurs.
Event dead zone is measured with pulse width of 3ns; attenuation dead zone is measured with pulse width of 5ns.
