Norska 
Engelsk 
Svenska 
1399.99.0077
| H+S | |
|---|---|
| Radome material | PC (Polycarbonate) |
| Dimensions | 40 mm x 108 mm x 474 mm (Height x Width x Depth) |
| Back plate/base plate material | Aluminum |
| Environment (application) | Indoor/Outdoor |
| Remarks | For further information please refer to data sheet. , MTBF (h): 3000000Values for LNA power consumption, noise figure and gain are given for a 5V operating voltage and may differ slightly for a lower voltage. , Indicated VSWR and gain values are valid for a metallic ground plane of 0.5 x 1 m or larger. , High-voltage-protection: no voltage on RF port, if catenary line touches antenna (EN 50124-1, 3.8 kVDC, 27.5 kVAC)High-current-protection: Designed acc. to UIC 533, DC-grounded antenna element (protection against lightning and short circuit with catenary lines(40kA/0.125s).Corrosion: Low corrosion design acc. to MIL-F-14072(E).Mounting: Shall be installed in longitudinal position to the wind/driving direction. 4x composite sealing washers included for silicone-free sealing of the mounting screws. |
| Antenna family | SENCITY® Rail Low Profile |
| Back plate/base plate plating | Passivated (Plating) |
| Storage temperature | -55 °C ... 85 °C |
| Noise figure | 1.6 dB |
| Product code | 1399.99.0077 |
| Input voltage | 3 V ... 5 V |
| LNA is connected to | Port 3 |
| Ingress protection (IP Rating) | IP69 |
| Radome colour | RAL 7043 (dark grey) |
| Current cunsumption | 20 mA |
| Antenna configuration | MiMo 2x2 |
| Solar radiation | UL 746C, F1 |
| Bands | Cell/WiFi 1: 694 MHz ... 960 MHz, VSWR 1.8, Gain 5 dBiCell/WiFi 2: 1350 MHz ... 1450 MHz, VSWR 1.9, Gain 7 dBiCell/WiFi 3: 1450 MHz ... 2700 MHz, VSWR 1.6, Gain 6.5 dBiCell/WiFi 4: 3300 MHz ... 4200 MHz, VSWR 1.8, Gain 7.5 dBiCell/WiFi 5: 4900 MHz ... 5150 MHz, VSWR 1.8, Gain 9 dBiCell/WiFi 6: 5150 MHz ... 7125 MHz, VSWR 1.8, Gain 8 dBiGNSS: 1559 MHz ... 1610 MHz, VSWR 1.5 |
| Back plate/base plate colour | Grey |
| Total gain @90° elevation | 30 dBic |
| Weight | 1.3 kg |
| Flammability rating | EN 45545-2 R24 HL3 |
| Operation temperature | -55 °C ... 85 °C |
