1302.99.0026
H+S | |
---|---|
Radome material | PC (Polycarbonate) |
Dimensions | 154 mm x 100 mm x 256 mm (Height x Width x Depth) |
Back plate/base plate material | Aluminum |
Environment (application) | Indoor/Outdoor |
Windload | Wind Speed survival: 500 km/h |
Remarks | For further information please refer to data sheet. , MTBF (h): 3000000Values for LNA power consumption, noise figure and gain are given for a 5V operating voltage and may differ slightly for a lower voltage.This Antenna is compliant with the Radio Equipment Directive 2014/53/EU: EMC: EN50121-3-2 (2016)ETSI EN 303 413 V.1.1.1 (2017-06)ETSI EN 301 489-1 V2.2.3 (2019-03)ETSI EN 301 489-19 V2.1.1 (2019-04) , Indicated VSWR values are valid for a metallic ground plane of 2.0 x 2.0m or larger. Indicated gain values will be achieved on a metallic ground plane of 1.0 x 1.0 m or larger. , High-voltage-protection: no voltage on RF port, if the catenary line touches antenna (EN 50124-1, 27.5 kVAC/1min).High-current-protection: Designed acc. to UIC 533, DC-grounded antenna element protection against lightning and short circuit with catenary lines (EN50388, EN 50122-1, 40kA/0.125sec)Corrosion: Low corrosion design according to MIL-F-14072(E), 96 hours Salt Spray test.Mounting: Shall be installed in longitudinal position to the wind/driving direction.Suitable for installation on high-speed trains with a maximum speed of 500 km/hr. |
Antenna family | SENCITY® Rail |
Flammability rating | EN 45545-2 R24 HL3 |
Back plate/base plate plating | Passivated (Plating) |
Storage temperature | -55 °C ... 85 °C |
Operation temperature | -55 °C ... 85 °C |
Noise figure | 1.6 dB |
Product code | 1302.99.0026 |
Input voltage | 3 V ... 5 V |
LNA is connected to | Port 2 |
Ingress protection (IP Rating) | IP67, IP69 |
Transport temperature | -55 °C ... 85 °C |
Radome colour | RAL 7043 (dark grey) |
Current cunsumption | 20 mA |
Antenna configuration | SiSo |
Solar radiation | UL 746C, F1 |
Bands | PTC: 219 MHz ... 220 MHz, VSWR 1.5, Gain 1.72 dBiGNSS: 1559 MHz ... 1620 MHz, VSWR 1.8 |
Back plate/base plate colour | Grey |
Total gain @90° elevation | 30 dBic |
Weight | 1.6 kg |